Tuesday, January 23, 2007

Gauge, ease and fashion--or "why doesn't my sweater fit?"

includes a how-to
GAUGE, EASE and FASHION--
or "WHY DOESN'T MY HAND KNITTED SWEATER FIT?"

Knitting any pattern for the first time is an act of faith. You see a pattern. It appears on a model, cunningly displayed on a chair, or hanging at the LYS. Through some combination of experience, fashion sense and hope, you decide that although you aren't a model, a chair, or a hanger, that sweater will surely look as well on you.

You buy the yarn, you buy the pattern, you cast on. You switch needles 3 times until you get the exact gauge. You work diligently, keeping the gauge perfect all through the sweater. You assemble your masterpiece--and--well, um.

Your new sweater fits best if you don't button it and looks most modest if you don't breathe, or at least, don't breathe deeply around men other than your husband. And forget about raising your arms. It fits your daughter well enough though, so it goes to her. Not a disappointment, exactly, because she does look good in it, and modest too, but a sweater for your daughter is not what you were aiming for. What went wrong?

I am here to absolve you. It isn't your fault. It wasn't an error in your gauge--there was insufficient "ease" in the pattern to get the fit you were looking to get.

EASE

So what is ease? Well, when you buy a sweater at the store, you try a few on. Perhaps you find that even among garments from the same manufacturer, you prefer a size 6 sweater, while in a different model, a size 4 might fit better, you skinny thing you. Assuming we are not talking high-fashion sweaters here, the difference between the way the two sweaters fit is due to their "ease."

Stated otherwise, "ease" in a technical sense does not refer to lolling about watching TV while eating bon-bons. It refers to the amount of extra room inside your clothes--how much looser your clothes must fit than your skin does, in order that you do not tear your clothes (or compromise your dignity) every time you lift your arms, turn around, sit down. It is the amount of extra room which allows your clothes to slide and glide becomingly as you move around.

FASHION

Confusingly, the concept of ease often runs right into the concept of fashion. If you were to look at one high-schooler in each of the two major genders, you must blame fashion, not ease, for the fact that his pants could conceal himself and two friends (one in each baggy leg) while her pants can barely conceal herself. Fashion, not ease, dictates his pants are ready to fall off the edge because they are too loose, while her pants are ready to do the same for the opposite reason. Yet, even if both were dressed as their mothers would like them to be, it would be ease, not fashion, that dictates her pants must be cut broader in the beam than his, and that his pants must, regardless of fashion, be cut looser in the crotch than hers, at least if he desires to father viable offspring in the future, if you catch my drift here, ladies.

Leave aside fashion and assume that we knitters are persons of distinction seeking sober well-fitting garments. We still might not get what we want when set out to knit a sweater, because we might not consider how much ease we actually like to have in our clothing. And even if we do know how much ease we want in our clothing, we might not know how much ease the pattern creator allowed. When we leave sobriety behind and add fashion to the equation, we step ever further away from any assurance our laboriously hand-knitted garment is going to fit in an attractive manner. Obviously, what is wanted is the baby bear's amount of ease--not too much, not too little, but just right. But how to find it?

HOW TO MAKE SWEATERS THAT FIT

Here is the trick. Do NOT measure your BODY. No. Or at least, not yet--not first. Instead, go and measure your favorite sweater/hat/gloves/whatever it is you are trying to knit. That's right. Do not wrap the tape measure around you--use it to measure your favorite garment, instead.
click picture
The reason you love that garment is because it fits you the way you like clothes to fit. And that fit is something you can analyze. How big around is the sweater in the area of your bust? How big is your actual bust? The difference is the amount of ease you prefer in a sweater. Are you surprised that it might be as much as 8 inches, and maybe even 10 inches in a heavy jacket-type sweater? I know I was when I first started knitting sweaters.

How long do you want that sweater to be--do you want your "hips" (speaking euphemistically here) covered, or do you find that a garment grazing your belly-button is quite long enough, thank you? Better be sure that the sweater you are making is long enough to cover what you want covered (and only that). The best way, again, is going to be to measure your favorite sweater. Ditto sleeve length, ditto shoulder span, ditto neck hole width and depth, ditto v-neck depth and angle.

How about the depth of the armhole? My sister, a very thin work-out type person who wears a preposterously small size for an adult, just gave my young teenage daughter a very expensive Norwegian tapestry-knit sweater she originally bought for herself. It fit my sister very well everywhere except for the depth of the armholes. The armholes were too shallow, causing the sweater to bunch unattractively under my sister's (thin) arms. In other words, even assuming the garment you want to knit has the same armhole style as your fave, what is the armhole depth of your proposed creation?

click picture
Now let's add fashion to the equation: Look at the shoulder--are all your favorite sweaters drop shoulder? If so, why assume that raglan sweater you are planning to knit is going to be flattering? A drop shoulder sweater typically hangs so the shoulder seam lies some inches past your natural shoulder--a shoulder-broadening boon to the narrow-shouldered. A raglan sweater has, technically speaking, no shoulder at all. The wearer's shoulder defines the sweater's shoulder. A narrow-shouldered person accustomed to depending on their sweater for a few extra inches of shoulder-broadening might possibly look like the nose-cone of a ballistic missile in a raglan sweater (ask me how I know...). On the other hand, a broad-shouldered swimmer looking to minimize her shoulder span might look equally ridiculous in a drop-shouldered sweater--like she changed her sport to football and forgot to take off the pads.

OK, enough philosophy. Here's where the rubber meets the road. Before you knit a sweater from a pattern, be SURE that the pattern gives the FINISHED GARMENT SIZE in inches (or centimeters) not just in dress sizes. If the pattern does NOT give the finished garment size, you proceed at your own risk and have a lot of detective work in front of you. Where finished garment sizes ARE provided, USE THEM. If you are a size 10, and the finished garment size for size 10 differs from your favorite sweater, you must disregard the size designation--DO NOT KNIT A SIZE 10. No. Do not. Knit the sweater which will give you the finished garment size, measured in inches (or centimeters) closest to your favorite sweater. This way, regardless of how much ease the PATTERN MAKER thought would be appropriate, your finished sweater--whether it is labeled size 8 or size 14, will fit YOUR notion of how much ease is appropriate to YOUR body.

You may have to do some detective work to figure out some of the dimensions of the finished garment--the armhole depth is typically not given in American patterns (although it often is in European ones). You may have to work backwards from the pattern directions (so and so many rows, at such and such a row gauge) to determine the armhole opening depth. (Hint: your LYS lady (man?) is a great resource here, and it is for this service that you should be HAPPY to pay them more per skein than you could pay for that same yarn on the internet.) (Conversely, if this is all beyond the LYS personnel, think about finding a different LYS.)

A caveat: The heavier the fabric, the greater ease required. If your favorite sweater is lighter weight than the weight of the sweater you are planning to knit, you will have to add ease so the thicker sweater fits as well as the thinner sweater does. Conversely, if your favorite sweater is heavier in weight than the sweater you are planning to knit, you must subtract ease to get to the right fit. How much ease to add or subtract is, of course, a judgment call, which is why the very best way to get a good result is to use a sweater in the style and weight you want to make as your taking-off point.

click picture
Another caveat: Very high fashion styling puts paid to all the foregoing because, unless you already own a leg-of-mutton sleeved sweater with a twirly button band and the fronts longer than the back, you really have nothing against which to measure your proposed new handknitted leg-of-mutton sweater with etc. (And if you did possess such a creature already, it might be unlikely that you'd require another.) In such a case, perhaps a foray into a modish department store or boutique and some surreptitious activity with your tape measure in the fitting room will lay the necessary groundwork to assure a better fit when this eventual fashion masterpiece rolls from your needles.

A final thought: If you used the same yarn and needles to make your next project, you'd be ahead of the game. You already have a big, big gauge swatch in the sweater (hat, mittens, whatever) which you made first. You have an important body of knowledge and experience gleaned from working with that yarn and those needles. You know in the core of your being what X number of stitches look like after they come off the needles. With this information, you're far more likely to make a fitting garment the second time through than you were the first time around.

After all, think on traditional folk knitters: unlike modern knitters, they didn't use a different yarn and different needles for each project. In fact, most had access to only one weight of yarn, and they used the same needles over and over again. I don't advocate that every sweater you ever make ought to be in the same yarn as you used for the first one, but you will get an increasingly professional-looking result with each project for which you use the same yarn and needles.

--TECHknitter

24 Comments:

Anonymous Clair St. Michel said...

This is a very elaborate post! Thanks for all of your hard work!

January 23, 2007 at 8:10 PM  
Anonymous Anonymous said...

Very informative. Very sensible. Especially the idea that I should measure the size of my favorite sweater in order to knit a sweater that fits me.

Also, welcome back!

January 23, 2007 at 9:32 PM  
Blogger sogalitno said...

OH.MI.GOD

JUST WHAT I NEEDED. I am struggling with my first ever Aran for myself - i have made some for kids. Lots of sweaters for babies ...lots of shawls, gloves, etc.

I knit my 2nd sweater for myself this summer but it was in cotton and onesizefits all.

Interestingly someone mentioned to measure a sweater that fit or I want to fit like this one - and I did but the patterns are such that it would be too small in one size so i am making it the larger size.

but now i am going to remeasure that favorite sweater and then see whats up with the sizing of the pattern.

you are a GREAT teacher. Thanks so much... this is getting bookmarked!

January 23, 2007 at 10:26 PM  
Anonymous Anonymous said...

My goodness, I've just learned so much!!! I can tell you for sure, I'll be coming back to this post again next time I'm ready to cast on for a new sweater. Thank you so much!!!!

January 24, 2007 at 7:52 AM  
Anonymous knotingale said...

This was very helpful. Even when I think I've read all about a topic, I still learn something by reading your blog.

January 24, 2007 at 9:18 PM  
Anonymous Angie said...

Super description! Thanks for making it understandable and good illustrations.

January 24, 2007 at 9:42 PM  
Anonymous Anonymous said...

Thank you soooo much! Your explanations are so easy to follow. This is exactly what I needed for my next sweater.

January 15, 2009 at 2:02 AM  
Blogger Lisa F. said...

Good stuff -- thanks!

January 1, 2010 at 9:44 PM  
Anonymous earthy1 said...

Thank you for this great post, especially the part about different types of fabric requiring different amounts of ease.

January 6, 2010 at 6:16 AM  
Blogger SLOW FOOD MIDCOAST MAINE said...

Is it desireable to wash (if yarn tag recommends washing) or dry clean the swatch in order to determine the preferred gauge?

April 27, 2010 at 4:56 PM  
Anonymous pinestate34 said...

I obviously did not read enough of your blog before my last post or I would have seen that you believe washing a swatch is the preferred way to go. I asked because a yarn shop in NYC which touts its expertise at providing individualized patterns to go with the yarn it sells seemed to think I was nuts when I called them after returning home to Maine and making and washing a swatch. I told them the washed gauge was larger than the unwashed (the yarn was a cotton-rayon blend) and they were surprised. They said they never washed swatches before measuring gauge. I did not inquire if that meant they never washed the finished garment either.

April 27, 2010 at 5:14 PM  
Blogger TECHknitter said...

Hi slow food; Yes, the swatch must be "dressed" as you expect to "dress" the sweater before wearing it. If you are planning to wash and block the sweater, then wash and block the swatch. If you are planning to dry clean the sweater, then dry clean the swatch (the dry cleaner will block the sweater as part of the finishing process--you must ask the dry cleaner to block the swatch, also, by the same method.

Now, there is one little caveat about all this: BEFORE you dress the swatch, make sure to write down your stitch and row gauge. This is that you can check your knitting as you go along. As we knit, the gauge sometimes goes off, and it is wise to check the gauge every so often. If you don't know what the gauge AS YOU KNIT should be, you have no way to measure if your gauge is going off. Therefore, compare your knitting as-you-go to the measurements of the UNBLOCKED swatch, remembering that the finished garment size will be larger--just as the swatch was smaller before it was dressed.

-Thanks for writing--TK

April 27, 2010 at 10:02 PM  
Anonymous Anonymous said...

This is an interesting and informative post and it would be very helpful if I had a well-fitting favourite sweater.

May 18, 2010 at 6:23 AM  
Anonymous Anonymous said...

No wonder my stuff never fits! And now that I am most of all interested in making my own patterns, I feel like I now have a chance to get it right!
Thank you very much!

June 9, 2011 at 1:50 PM  
Anonymous Pat Bowne said...

An excellent post! I will save it in my bank of essential knitting resources.

June 27, 2011 at 9:43 AM  
Anonymous Anonymous said...

Great info--and amusing, too!

January 15, 2012 at 7:58 AM  
Anonymous Anonymous said...

Great article! Thanks for sharing..

May 29, 2012 at 8:25 AM  
Blogger ObscureOne said...

Oh this is sooo well written! I'm a tech writer and am just awed by this. Well done! Thank you for the advice, too.

Thanks for raising the bar (you rat).

July 2, 2012 at 11:48 AM  
Anonymous Peggy said...

You have made this very understandable and amusing at the same time.
Thank you for all the information.

September 19, 2012 at 6:09 AM  
Anonymous Anonymous said...

Thank you so much for your extremely well written information. You have helped tremendously!

Sincerely

January 13, 2013 at 8:45 PM  
Blogger terre said...

Thank you GOD for this article! I finally understand.

February 23, 2013 at 6:12 PM  
Anonymous Anonymous said...

I wish I had read this years ago - makes complete sense of what the pattern says should fit, and how I actually like things to fit.

February 17, 2014 at 4:54 AM  
Anonymous Anonymous said...

Now I understand.....I am now working towards the knitted garment that actually fits! Thank you.

September 4, 2014 at 2:39 AM  
Anonymous Anonymous said...

Great advice and very similar to what a savvy sewer does with a pattern before constructing a garment of woven fabric. In fact, experienced sewers may well smile quietly to themselves on reading this..

October 16, 2014 at 9:11 AM  

Post a Comment

Links to this post:

Create a Link

<< Home